iCE280 accessories

Part #	Description
PrinCE MicroInjector	PrinCE MicroInjector The PrinCE MicroInjector is the preferred option in an environment where walk-up robustness is critical. It provides good sample throughput and requires a smaller sample volume. Throughput: up to 4 - 5 injections/hour Tray capacity: 40 @ 11mm vials - not microtiter plate compatible Maximum injections (CFR v2.3): up to 160 in up to 60 hours Typical sample volume: 10 µL Refrigeration: 8°C to 40°C Electrical: 115/230 VAC +/- 10%, 50 – 60 Hz Size: 34.5 cm (13 5/8") Wide x 46 cm (18") High x 49 cm (19 1/2") Deep Weight: 77 pounds (35 kg) with packaging, 62 pounds (28 kg) without packaging
Alcott Autosampler 719A	Alcott Autosampler 719A The Alcott Autosampler is preferred when the iCE280 system is used frequently for a large number of injections - run up to 200 samples in up to 60 hours. For even greater convenience, add the Maximizer option with continuous flow pump and 96 well microtiter plate format. Throughput: up to 7 injections/hour Tray capacity: 50 @ 15mm vials or 96 well microtiter plate Maximum injections (CFR v2.3): up to 200 in up to 60 hours Typical sample volume: 40 µL Refrigeration: 8°C to 40°C Electrical: 115/230 VAC +/- 10%, 50 – 60 Hz Size: 32.5 cm (12 3/4") Wide x 33.5 cm (13 1/8") High x 55 cm (21.5") Deep Weight: 48 pounds (22 kg) with packaging, 35 pounds (16 kg) without packaging

Part #	Description
iCE280 IEF Analyzer System with Alcott Analyzer	iCE280 IEF Analyzer System with Alcott Analyzer Welcome to the world of high throughput! Increase productivity Enhance flexibility The Maximizer High Throughput option includes a continuous flow pump and microtiter plate adapter. Choose a 96 well microtiter plate (single use or reusable) from any manufacturer. Use a robotic system to fully automate sample preparation. No extra footprint is required as the continuous flow pump is located on a stand (provided by Convergent) above the Alcott.